a simple unmount and then remove the drive will not be enough, because the drive is still powered and spinning.
On my Linuxbox (Archlinux) i have found a solution like :
udisks --detach /dev/sdX
But udisk is not included on srcd
this should works also to :
udisksctl unmount -b /dev/sda1
udisksctl power-off -b /dev/sda
But udisksctl is not included either
What is the proper way to do this with srcd?
Questions about problems with your hardware. For example, if you the kernel hangs during boot because of an hardware failure or if you have a problem with a driver not working or missing.
1 post • Page 1 of 1