Need to detect hard drive to recover data; unable to do so

Questions about problems with your hardware. For example, if you the kernel hangs during boot because of an hardware failure or if you have a problem with a driver not working or missing.
jenko
Posts: 1
Joined: 31 Aug 2013, 02:12

Need to detect hard drive to recover data; unable to do so

Postby jenko » 31 Aug 2013, 02:19

New to Linux. Read a lot around and finally giving up and creating a thread. Here are the results of the few commands I ran on the Terminal. Please note, the hard drive is not showing up on TestDisk.

Code: Select all

[email protected] /root % dmesg                                                             
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.4.52-std371-amd64 ([email protected]) (gcc version 4.4.7 (Gentoo 4.4.7 p1.2, pie-0.4.5) ) #2 SMP Wed Jul 3 20:35:57 UTC 2013
[    0.000000] Command line: dostartx initrd=initram.igz BOOT_IMAGE=rescue64
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[    0.000000]  BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000009ce3f000 (usable)
[    0.000000]  BIOS-e820: 000000009ce3f000 - 000000009cebf000 (reserved)
[    0.000000]  BIOS-e820: 000000009cebf000 - 000000009cfbf000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000009cfbf000 - 000000009cfff000 (ACPI data)
[    0.000000]  BIOS-e820: 000000009cfff000 - 000000009d000000 (usable)
[    0.000000]  BIOS-e820: 000000009d000000 - 000000009fa00000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 000000015fe00000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Hewlett-Packard HP Pavilion dv6 Notebook PC/3581, BIOS F.13 04/25/2011
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x15fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FE0000000 write-back
[    0.000000]   2 base 09D000000 mask FFF000000 uncachable
[    0.000000]   3 base 09E000000 mask FFE000000 uncachable
[    0.000000]   4 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   5 base 100000000 mask FC0000000 write-back
[    0.000000]   6 base 140000000 mask FF0000000 write-back
[    0.000000]   7 base 150000000 mask FF0000000 write-back
[    0.000000]   8 base 15FE00000 mask FFFE00000 uncachable
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] last_pfn = 0x9d000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000fe1b0] fe1b0
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] init_memory_mapping: 0000000000000000-000000009d000000
[    0.000000]  0000000000 - 009d000000 page 2M
[    0.000000] kernel direct mapping tables up to 0x9cffffff @ [mem 0x1fffc000-0x1fffffff]
[    0.000000] init_memory_mapping: 0000000100000000-000000015fe00000
[    0.000000]  0100000000 - 015fe00000 page 2M
[    0.000000] kernel direct mapping tables up to 0x15fdfffff @ [mem 0x9ce3c000-0x9ce3efff]
[    0.000000] RAMDISK: 7f4d6000 - 7ffff000
[    0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 000000009cffe120 00094 (v01 HPQOEM SLIC-MPC 00000001      01000013)
[    0.000000] ACPI: FACP 000000009cffc000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: DSDT 000000009cfec000 0C553 (v01 HP     INSYDE   00000000 MSFT 01000013)
[    0.000000] ACPI: FACS 000000009cf6c000 00040
[    0.000000] ACPI: ASF! 000000009cffd000 000A5 (v32 HP     INSYDE   00000001 MSFT 01000013)
[    0.000000] ACPI: HPET 000000009cffb000 00038 (v01 HP     INSYDE   00000001 MSFT 01000013)
[    0.000000] ACPI: APIC 000000009cffa000 0008C (v02 HP     INSYDE   00000001 MSFT 01000013)
[    0.000000] ACPI: MCFG 000000009cff9000 0003C (v01 HP     INSYDE   00000001 MSFT 01000013)
[    0.000000] ACPI: SLIC 000000009cfeb000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: SSDT 000000009cfea000 0051F (v01 HP     INSYDE   00001000 MSFT 01000013)
[    0.000000] ACPI: BOOT 000000009cfe8000 00028 (v01 HP     INSYDE   00000001 MSFT 01000013)
[    0.000000] ACPI: ASPT 000000009cfe5000 00034 (v07 HP     INSYDE   00000001 MSFT 01000013)
[    0.000000] ACPI: SSDT 000000009cfe4000 0090C (v01 HP     INSYDE   00003000 INTL 20100806)
[    0.000000] ACPI: SSDT 000000009cfe3000 00996 (v01 HP     INSYDE   00003000 INTL 20100806)
[    0.000000] ACPI: SSDT 000000009cfe2000 002DA (v01 HP     INSYDE   00003000 INTL 20100806)
[    0.000000] ACPI: SSDT 000000009cfe1000 0035D (v01 HP     INSYDE   00003000 INTL 20100806)
[    0.000000] ACPI: SSDT 000000009cfdb000 024A1 (v01 HP     INSYDE   00001000 INTL 20100806)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000015fe00000
[    0.000000] Initmem setup node 0 0000000000000000-000000015fe00000
[    0.000000]   NODE_DATA [mem 0x15fdec000-0x15fdfffff]
[    0.000000]  [ffffea0000000000-ffffea00057fffff] PMD -> [ffff88015b400000-ffff88015f3fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x0015fe00
[    0.000000] Movable zone start PFN for each node
[    0.000000] Early memory PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x0009ce3f
[    0.000000]     0: 0x0009cfff -> 0x0009d000
[    0.000000]     0: 0x00100000 -> 0x0015fe00
[    0.000000] On node 0 totalpages: 1035213
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 141 pages reserved
[    0.000000]   DMA zone: 3776 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 16320 pages used for memmap
[    0.000000]   DMA32 zone: 622208 pages, LIFO batch:31
[    0.000000]   Normal zone: 6136 pages used for memmap
[    0.000000]   Normal zone: 386568 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] Allocating PCI resources starting at 9fa00000 (gap: 9fa00000:40600000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88015fa00000 s83008 r8192 d23488 u262144
[    0.000000] pcpu-alloc: s83008 r8192 d23488 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1012552
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: dostartx initrd=initram.igz BOOT_IMAGE=rescue64
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Memory: 3972660k/5765120k available (6855k kernel code, 1624268k absent, 168192k reserved, 6397k data, 8720k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:16640 nr_irqs:744 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 16777216 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.001000] Detected 2095.250 MHz processor.
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4190.50 BogoMIPS (lpj=2095250)
[    0.000211] pid_max: default: 32768 minimum: 301
[    0.000337] Security Framework initialized
[    0.000442] SELinux:  Disabled at boot.
[    0.000904] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.002133] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.002695] Mount-cache hash table entries: 256
[    0.003010] Initializing cgroup subsys cpuacct
[    0.003109] Initializing cgroup subsys memory
[    0.003232] Initializing cgroup subsys devices
[    0.003331] Initializing cgroup subsys freezer
[    0.003430] Initializing cgroup subsys net_cls
[    0.003529] Initializing cgroup subsys blkio
[    0.003631] Initializing cgroup subsys perf_event
[    0.003757] CPU: Physical Processor ID: 0
[    0.003854] CPU: Processor Core ID: 0
[    0.003954] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.003955] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.004169] mce: CPU supports 7 MCE banks
[    0.004274] CPU0: Thermal monitoring handled by SMI
[    0.004282] using mwait in idle threads.
[    0.005835] ACPI: Core revision 20120320
[    0.026571] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.036660] CPU0: Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz stepping 07
[    0.137964] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[    0.138281] PEBS disabled due to CPU errata.
[    0.138380] ... version:                3
[    0.138477] ... bit width:              48
[    0.138574] ... generic registers:      4
[    0.138672] ... value mask:             0000ffffffffffff
[    0.138771] ... max period:             000000007fffffff
[    0.138870] ... fixed-purpose events:   3
[    0.138969] ... event mask:             000000070000000f
[    0.139250] NMI watchdog: enabled, takes one hw-pmu counter.
[    0.139431] Booting Node   0, Processors  #1
[    0.150542] CPU1: Thermal monitoring handled by SMI
[    0.152643] NMI watchdog: enabled, takes one hw-pmu counter.
[    0.152923]  #2
[    0.164091] CPU2: Thermal monitoring handled by SMI
[    0.166186] NMI watchdog: enabled, takes one hw-pmu counter.
[    0.166456]  #3
[    0.177618] CPU3: Thermal monitoring handled by SMI
[    0.179713] NMI watchdog: enabled, takes one hw-pmu counter.
[    0.179934] Brought up 4 CPUs
[    0.180030] Total of 4 processors activated (16762.00 BogoMIPS).
[    0.183828] devtmpfs: initialized
[    0.184149] PM: Registering ACPI NVS region [mem 0x9cebf000-0x9cfbefff] (1048576 bytes)
[    0.185481] atomic64 test passed for x86-64 platform with CX8 and with SSE
[    0.185613] RTC time:  6:41:06, date: 08/31/13
[    0.185754] NET: Registered protocol family 16
[    0.186093] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.186247] ACPI: bus type pci registered
[    0.186422] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.186579] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.212046] PCI: Using configuration type 1 for base access
[    0.213309] bio: create slab <bio-0> at 0
[    0.213476] ACPI: Added _OSI(Module Device)
[    0.213574] ACPI: Added _OSI(Processor Device)
[    0.213673] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.213772] ACPI: Added _OSI(Processor Aggregator Device)
[    0.215618] ACPI: EC: Look up EC in DSDT
[    0.217306] ACPI: Executed 1 blocks of module-level executable AML code
[    0.227902] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.228577] ACPI: SSDT 000000009ce70798 00727 (v01  PmRef  Cpu0Cst 00003001 INTL 20100806)
[    0.229275] ACPI: Dynamic OEM Table Load:
[    0.229454] ACPI: SSDT           (null) 00727 (v01  PmRef  Cpu0Cst 00003001 INTL 20100806)
[    0.233138] ACPI: SSDT 000000009ce71a98 00303 (v01  PmRef    ApIst 00003000 INTL 20100806)
[    0.233877] ACPI: Dynamic OEM Table Load:
[    0.234052] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20100806)
[    0.237969] ACPI: SSDT 000000009ce6fd98 00119 (v01  PmRef    ApCst 00003000 INTL 20100806)
[    0.238659] ACPI: Dynamic OEM Table Load:
[    0.238840] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20100806)
[    0.246988] ACPI: Interpreter enabled
[    0.247088] ACPI: (supports S0 S3 S5)
[    0.247323] ACPI: Using IOAPIC for interrupt routing
[    0.256621] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.257136] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[    0.257239] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.257745] \_SB_.PCI0:_OSC invalid UUID
[    0.257747] _OSC request data:1 8 0
[    0.257751] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.258422] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.258526] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.258628] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.258786] pci_root PNP0A08:00: host bridge window [mem 0x9fa00000-0xfeafffff]
[    0.258971] PCI host bridge to bus 0000:00
[    0.259069] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.259171] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.259273] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.259376] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
[    0.259486] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.259526] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.259561] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.259582] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[    0.259594] pci 0000:00:02.0: reg 10: [mem 0xc0000000-0xc03fffff 64bit]
[    0.259601] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.259606] pci 0000:00:02.0: reg 20: [io  0x6000-0x603f]
[    0.259664] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.259689] pci 0000:00:16.0: reg 10: [mem 0xc7404000-0xc740400f 64bit]
[    0.259773] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.259810] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.260145] pci 0000:00:1a.0: reg 10: [mem 0xc740a000-0xc740a3ff]
[    0.262083] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.262121] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.262138] pci 0000:00:1b.0: reg 10: [mem 0xc7400000-0xc7403fff 64bit]
[    0.262212] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.262240] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.262326] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.262354] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    0.262439] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.262469] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
[    0.262629] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.262673] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.263005] pci 0000:00:1d.0: reg 10: [mem 0xc7409000-0xc74093ff]
[    0.264957] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.265028] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[    0.265162] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.265183] pci 0000:00:1f.2: reg 10: [io  0x6098-0x609f]
[    0.265192] pci 0000:00:1f.2: reg 14: [io  0x60bc-0x60bf]
[    0.265201] pci 0000:00:1f.2: reg 18: [io  0x6090-0x6097]
[    0.265210] pci 0000:00:1f.2: reg 1c: [io  0x60b8-0x60bb]
[    0.265219] pci 0000:00:1f.2: reg 20: [io  0x6060-0x607f]
[    0.265228] pci 0000:00:1f.2: reg 24: [mem 0xc7408000-0xc74087ff]
[    0.265277] pci 0000:00:1f.2: PME# supported from D3hot
[    0.265298] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.265315] pci 0000:00:1f.3: reg 10: [mem 0xc7406000-0xc74060ff 64bit]
[    0.265338] pci 0000:00:1f.3: reg 20: [io  0x6040-0x605f]
[    0.265403] pci 0000:01:00.0: [1002:6760] type 00 class 0x030000
[    0.265420] pci 0000:01:00.0: reg 10: [mem 0xa0000000-0xafffffff 64bit pref]
[    0.265434] pci 0000:01:00.0: reg 18: [mem 0xc6400000-0xc641ffff 64bit]
[    0.265444] pci 0000:01:00.0: reg 20: [io  0x5000-0x50ff]
[    0.265461] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[    0.265502] pci 0000:01:00.0: supports D1 D2
[    0.266785] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.266890] pci 0000:00:01.0:   bridge window [io  0x5000-0x5fff]
[    0.266893] pci 0000:00:01.0:   bridge window [mem 0xc6400000-0xc73fffff]
[    0.266898] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[    0.266983] pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000
[    0.267006] pci 0000:07:00.0: reg 10: [io  0x4000-0x40ff]
[    0.267045] pci 0000:07:00.0: reg 18: [mem 0xc0404000-0xc0404fff 64bit pref]
[    0.267068] pci 0000:07:00.0: reg 20: [mem 0xc0400000-0xc0403fff 64bit pref]
[    0.267166] pci 0000:07:00.0: supports D1 D2
[    0.267168] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.269040] pci 0000:00:1c.0: PCI bridge to [bus 07-0c]
[    0.269159] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.269164] pci 0000:00:1c.0:   bridge window [mem 0xc5400000-0xc63fffff]
[    0.269171] pci 0000:00:1c.0:   bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
[    0.269381] pci 0000:0d:00.0: [8086:008b] type 00 class 0x028000
[    0.269539] pci 0000:0d:00.0: reg 10: [mem 0xc4400000-0xc4401fff 64bit]
[    0.270316] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold
[    0.272122] pci 0000:00:1c.1: PCI bridge to [bus 0d-12]
[    0.272223] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.272228] pci 0000:00:1c.1:   bridge window [mem 0xc4400000-0xc53fffff]
[    0.272235] pci 0000:00:1c.1:   bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
[    0.272309] pci 0000:13:00.0: [10ec:5209] type 00 class 0xff0000
[    0.272333] pci 0000:13:00.0: reg 10: [mem 0xc3400000-0xc3400fff]
[    0.272434] pci 0000:13:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
[    0.272509] pci 0000:13:00.0: supports D1 D2
[    0.272511] pci 0000:13:00.0: PME# supported from D1 D2 D3hot
[    0.274029] pci 0000:00:1c.2: PCI bridge to [bus 13-18]
[    0.274149] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.274153] pci 0000:00:1c.2:   bridge window [mem 0xc3400000-0xc43fffff]
[    0.274161] pci 0000:00:1c.2:   bridge window [mem 0xc2400000-0xc33fffff 64bit pref]
[    0.274183] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.274373] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.274412] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.274449] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    0.274503] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[    0.274604] \_SB_.PCI0:_OSC invalid UUID
[    0.274605] _OSC request data:1 1f 0
[    0.274610]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.274746] \_SB_.PCI0:_OSC invalid UUID
[    0.274748] _OSC request data:1 0 1d
[    0.274752]  pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[    0.274905] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.278791] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.279516] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 10 11 12 14 15)
[    0.280145] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 *4 5 6 10 11 12 14 15)
[    0.280769] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.281397] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.282157] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 *5 6 10 11 12 14 15)
[    0.282784] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.283411] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.284082] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.284243] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[    0.284398] vgaarb: loaded
[    0.284493] vgaarb: bridge control possible 0000:01:00.0
[    0.284592] vgaarb: no bridge control possible 0000:00:02.0
[    0.284768] SCSI subsystem initialized
[    0.284908] libata version 3.00 loaded.
[    0.284958] usbcore: registered new interface driver usbfs
[    0.285076] usbcore: registered new interface driver hub
[    0.285195] usbcore: registered new device driver usb
[    0.285346] PCI: Using ACPI for IRQ routing
[    0.294009] PCI: pci_cache_line_size set to 64 bytes
[    0.294137] reserve RAM buffer: 000000000009d800 - 000000000009ffff
[    0.294142] reserve RAM buffer: 000000009ce3f000 - 000000009fffffff
[    0.294144] reserve RAM buffer: 000000009d000000 - 000000009fffffff
[    0.294146] reserve RAM buffer: 000000015fe00000 - 000000015fffffff
[    0.294239] NetLabel: Initializing
[    0.294335] NetLabel:  domain hash size = 128
[    0.294432] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.294539] NetLabel:  unlabeled traffic allowed by default
[    0.294685] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.295146] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.297260] Switching to clocksource hpet
[    0.305776] pnp: PnP ACPI init
[    0.305888] ACPI: bus type pnp registered
[    0.306321] pnp 00:00: [bus 00-fe]
[    0.306324] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.306326] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.306328] pnp 00:00: [io  0x0d00-0xffff window]
[    0.306330] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.306332] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.306334] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.306336] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.306338] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.306342] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.306344] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.306346] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.306348] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.306350] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.306352] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.306354] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.306356] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.306358] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.306360] pnp 00:00: [mem 0x9fa00000-0xfeafffff window]
[    0.306446] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.306468] pnp 00:01: [io  0x0000-0x001f]
[    0.306470] pnp 00:01: [io  0x0081-0x0091]
[    0.306472] pnp 00:01: [io  0x0093-0x009f]
[    0.306474] pnp 00:01: [io  0x00c0-0x00df]
[    0.306476] pnp 00:01: [dma 4]
[    0.306497] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.306506] pnp 00:02: [mem 0xff000000-0xffffffff]
[    0.306528] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    0.306610] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[    0.306632] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.306642] pnp 00:04: [io  0x00f0]
[    0.306652] pnp 00:04: [irq 13]
[    0.306676] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.306687] pnp 00:05: [io  0x002e-0x002f]
[    0.306689] pnp 00:05: [io  0x004e-0x004f]
[    0.306690] pnp 00:05: [io  0x0061]
[    0.306692] pnp 00:05: [io  0x0063]
[    0.306694] pnp 00:05: [io  0x0065]
[    0.306695] pnp 00:05: [io  0x0067]
[    0.306697] pnp 00:05: [io  0x0070]
[    0.306698] pnp 00:05: [io  0x0080]
[    0.306700] pnp 00:05: [io  0x0092]
[    0.306701] pnp 00:05: [io  0x00b2-0x00b3]
[    0.306703] pnp 00:05: [io  0x0680-0x069f]
[    0.306705] pnp 00:05: [io  0x1000-0x100f]
[    0.306707] pnp 00:05: [io  0x1010-0x1013]
[    0.306708] pnp 00:05: [io  0xffff]
[    0.306710] pnp 00:05: [io  0x0400-0x0453]
[    0.306712] pnp 00:05: [io  0x0458-0x047f]
[    0.306713] pnp 00:05: [io  0x0500-0x057f]
[    0.306715] pnp 00:05: [io  0x164e-0x164f]
[    0.306765] system 00:05: [io  0x0680-0x069f] has been reserved
[    0.306866] system 00:05: [io  0x1000-0x100f] has been reserved
[    0.306967] system 00:05: [io  0x1010-0x1013] has been reserved
[    0.307068] system 00:05: [io  0xffff] has been reserved
[    0.307169] system 00:05: [io  0x0400-0x0453] has been reserved
[    0.307269] system 00:05: [io  0x0458-0x047f] has been reserved
[    0.307381] system 00:05: [io  0x0500-0x057f] has been reserved
[    0.307483] system 00:05: [io  0x164e-0x164f] has been reserved
[    0.307585] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.307594] pnp 00:06: [io  0x0070-0x0077]
[    0.307600] pnp 00:06: [irq 8]
[    0.307622] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.307643] pnp 00:07: [io  0x0454-0x0457]
[    0.307680] system 00:07: [io  0x0454-0x0457] has been reserved
[    0.307781] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.307814] pnp 00:08: [io  0x0060]
[    0.307816] pnp 00:08: [io  0x0064]
[    0.307823] pnp 00:08: [irq 1]
[    0.307847] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.307881] pnp 00:09: [irq 12]
[    0.307908] pnp 00:09: Plug and Play ACPI device, IDs SYN1e47 SYN1e00 SYN0002 PNP0f13 (active)
[    0.308015] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[    0.308017] pnp 00:0a: [mem 0xfed10000-0xfed17fff]
[    0.308019] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[    0.308021] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[    0.308023] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[    0.308025] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[    0.308027] pnp 00:0a: [mem 0xfed90000-0xfed93fff]
[    0.308028] pnp 00:0a: [mem 0xff000000-0xffffffff]
[    0.308030] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[    0.308032] pnp 00:0a: [mem 0x9fa00000-0x9fa00fff]
[    0.308074] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.308177] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.308279] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.308393] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.308495] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[    0.308598] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.308700] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.308803] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
[    0.308907] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.309009] system 00:0a: [mem 0x9fa00000-0x9fa00fff] has been reserved
[    0.309111] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.312760] pnp 00:0b: [irq 23]
[    0.312818] pnp 00:0b: Plug and Play ACPI device, IDs HPQ0004 (active)
[    0.312842] pnp 00:0c: [mem 0x20000000-0x201fffff]
[    0.312845] pnp 00:0c: [mem 0x40000000-0x401fffff]
[    0.312905] system 00:0c: [mem 0x20000000-0x201fffff] could not be reserved
[    0.313009] system 00:0c: [mem 0x40000000-0x401fffff] could not be reserved
[    0.313113] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.313133] pnp: PnP ACPI: found 13 devices
[    0.313230] ACPI: ACPI bus type pnp unregistered
[    0.320002] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[    0.320160] pci 0000:13:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[    0.320357] pci 0000:01:00.0: BAR 6: assigned [mem 0xc6420000-0xc643ffff pref]
[    0.320513] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.320613] pci 0000:00:01.0:   bridge window [io  0x5000-0x5fff]
[    0.320716] pci 0000:00:01.0:   bridge window [mem 0xc6400000-0xc73fffff]
[    0.320820] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[    0.320976] pci 0000:00:1c.0: PCI bridge to [bus 07-0c]
[    0.321077] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.321182] pci 0000:00:1c.0:   bridge window [mem 0xc5400000-0xc63fffff]
[    0.321286] pci 0000:00:1c.0:   bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
[    0.321452] pci 0000:00:1c.1: PCI bridge to [bus 0d-12]
[    0.321554] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.321659] pci 0000:00:1c.1:   bridge window [mem 0xc4400000-0xc53fffff]
[    0.321765] pci 0000:00:1c.1:   bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
[    0.321924] pci 0000:13:00.0: BAR 6: assigned [mem 0xc2400000-0xc240ffff pref]
[    0.322077] pci 0000:00:1c.2: PCI bridge to [bus 13-18]
[    0.322178] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.322283] pci 0000:00:1c.2:   bridge window [mem 0xc3400000-0xc43fffff]
[    0.322395] pci 0000:00:1c.2:   bridge window [mem 0xc2400000-0xc33fffff 64bit pref]
[    0.322589] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.322591] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.322593] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.322595] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
[    0.322598] pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
[    0.322600] pci_bus 0000:01: resource 1 [mem 0xc6400000-0xc73fffff]
[    0.322602] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
[    0.322604] pci_bus 0000:07: resource 0 [io  0x4000-0x4fff]
[    0.322606] pci_bus 0000:07: resource 1 [mem 0xc5400000-0xc63fffff]
[    0.322608] pci_bus 0000:07: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref]
[    0.322611] pci_bus 0000:0d: resource 0 [io  0x3000-0x3fff]
[    0.322613] pci_bus 0000:0d: resource 1 [mem 0xc4400000-0xc53fffff]
[    0.322615] pci_bus 0000:0d: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref]
[    0.322617] pci_bus 0000:13: resource 0 [io  0x2000-0x2fff]
[    0.322619] pci_bus 0000:13: resource 1 [mem 0xc3400000-0xc43fffff]
[    0.322621] pci_bus 0000:13: resource 2 [mem 0xc2400000-0xc33fffff 64bit pref]
[    0.322668] NET: Registered protocol family 2
[    0.322910] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.323962] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.325901] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.326215] TCP: Hash tables configured (established 524288 bind 65536)
[    0.326317] TCP: reno registered
[    0.326444] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.326568] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.326758] NET: Registered protocol family 1
[    0.326955] RPC: Registered named UNIX socket transport module.
[    0.327055] RPC: Registered udp transport module.
[    0.327153] RPC: Registered tcp transport module.
[    0.327251] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.327370] pci 0000:00:02.0: Boot video device
[    0.349416] PCI: CLS 64 bytes, default 64
[    0.358222] Unpacking initramfs...
[    1.575625] Freeing initrd memory: 11428k freed
[    1.577475] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.577600] Placing 64MB software IO TLB between ffff880098e3c000 - ffff88009ce3c000
[    1.577753] software IO TLB at phys 0x98e3c000 - 0x9ce3c000
[    1.577906] Simple Boot Flag at 0x44 set to 0x1
[    1.578966] audit: initializing netlink socket (disabled)
[    1.579075] type=2000 audit(1377931267.463:1): initialized
[    1.613127] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.615077] VFS: Disk quotas dquot_6.5.2
[    1.615217] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.615737] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.615962] NFS: Registering the id_resolver key type
[    1.616173] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.616281] NTFS driver 2.1.30 [Flags: R/O].
[    1.616481] fuse init (API version 7.18)
[    1.616736] JFS: nTxBlock = 8192, nTxLock = 65536
[    1.618533] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[    1.619278] Btrfs loaded
[    1.619480] aufs 3.4-20130506
[    1.619578] msgmni has been set to 7781
[    1.620014] alg: No test for stdrng (krng)
[    1.620121] NET: Registered protocol family 38
[    1.620258] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.620448] io scheduler noop registered
[    1.620548] io scheduler deadline registered
[    1.620698] io scheduler cfq registered (default)
[    1.620922] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    1.621118] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.621232] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.621334] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    1.621578] acpiphp_glue: can't evaluate _ADR (0x5)
[    1.621946] intel_idle: MWAIT substates: 0x21120
[    1.621948] intel_idle: v0.4 model 0x2A
[    1.621950] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.624105] ACPI: AC Adapter [AC] (on-line)
[    1.624291] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input0
[    1.626052] ACPI: Lid Switch [LID]
[    1.626214] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.626370] ACPI: Power Button [PWRB]
[    1.626548] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.626702] ACPI: Power Button [PWRF]
[    1.627076] ACPI: Requesting acpi_cpufreq
[    1.645399] thermal LNXTHERM:00: registered as thermal_zone0
[    1.645503] ACPI: Thermal Zone [THRM] (60 C)
[    1.645625] GHES: HEST is not enabled!
[    1.645799] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.652271] Non-volatile memory driver v1.3
[    1.652382] Linux agpgart interface v0.103
[    1.654171] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[    1.654344] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    1.655533] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[    1.655783] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[    1.656650] loop: module loaded
[    1.656840] ahci 0000:00:1f.2: version 3.0
[    1.656900] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    1.656954] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
[    1.657110] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[    1.657310] ahci 0000:00:1f.2: setting latency timer to 64
[    1.657825] scsi0 : ahci
[    1.658004] scsi1 : ahci
[    1.658159] scsi2 : ahci
[    1.658315] scsi3 : ahci
[    1.658488] scsi4 : ahci
[    1.658643] scsi5 : ahci
[    1.658833] ata1: SATA max UDMA/133 abar [email protected] port 0xc7408100 irq 41
[    1.659032] ata2: DUMMY
[    1.659137] ata3: DUMMY
[    1.659247] ata4: DUMMY
[    1.659373] ata5: DUMMY
[    1.659479] ata6: DUMMY
[    1.659691] Fixed MDIO Bus: probed
[    1.659875] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.660001] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.660005] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    1.660152] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.660378] ehci_hcd 0000:00:1a.0: debug port 2
[    1.664391] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    1.664408] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc740a000
[    1.670368] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.670560] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.670700] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.670852] usb usb1: Product: EHCI Host Controller
[    1.670951] usb usb1: Manufacturer: Linux 3.4.52-std371-amd64 ehci_hcd
[    1.671053] usb usb1: SerialNumber: 0000:00:1a.0
[    1.671246] hub 1-0:1.0: USB hub found
[    1.671366] hub 1-0:1.0: 2 ports detected
[    1.671578] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.671581] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    1.671758] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.671972] ehci_hcd 0000:00:1d.0: debug port 2
[    1.675089] ACPI: Battery Slot [BAT0] (battery present)
[    1.675941] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    1.675955] ehci_hcd 0000:00:1d.0: irq 20, io mem 0xc7409000
[    1.681351] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.681482] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.681584] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.681737] usb usb2: Product: EHCI Host Controller
[    1.681836] usb usb2: Manufacturer: Linux 3.4.52-std371-amd64 ehci_hcd
[    1.681937] usb usb2: SerialNumber: 0000:00:1d.0
[    1.682118] hub 2-0:1.0: USB hub found
[    1.682216] hub 2-0:1.0: 2 ports detected
[    1.682380] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.682489] uhci_hcd: USB Universal Host Controller Interface driver
[    1.682638] usbcore: registered new interface driver usbserial
[    1.682746] usbcore: registered new interface driver usbserial_generic
[    1.682853] USB Serial support registered for generic
[    1.682952] usbserial: USB Serial Driver core
[    1.683091] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.691146] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.691249] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.691439] mousedev: PS/2 mouse device common for all mice
[    1.691710] rtc_cmos 00:06: RTC can wake from S4
[    1.691936] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    1.692073] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.692249] device-mapper: uevent: version 1.0.3
[    1.692421] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
[    1.692705] cpuidle: using governor ladder
[    1.692925] cpuidle: using governor menu
[    1.693161] EFI Variables Facility v0.08 2004-May-17
[    1.693382] usbcore: registered new interface driver usbhid
[    1.693481] usbhid: USB HID core driver
[    1.693677] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.693790] TCP: cubic registered
[    1.693885] Initializing XFRM netlink socket
[    1.694108] NET: Registered protocol family 10
[    1.694404] Mobile IPv6
[    1.694500] NET: Registered protocol family 17
[    1.694630] Registering the dns_resolver key type
[    1.694983] registered taskstats version 1
[    1.695706]   Magic number: 9:110:672
[    1.695903] rtc_cmos 00:06: setting system clock to 2013-08-31 06:41:07 UTC (1377931267)
[    1.696332] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.697167] Initializing network drop monitor service
[    1.973051] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    2.087649] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    2.087833] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.088462] hub 1-1:1.0: USB hub found
[    2.088693] hub 1-1:1.0: 6 ports detected
[    2.191713] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[    2.306009] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    2.306169] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.306693] hub 2-1:1.0: USB hub found
[    2.307036] hub 2-1:1.0: 6 ports detected
[    2.381741] usb 1-1.2: new high-speed USB device number 3 using ehci_hcd
[    2.564811] usb 1-1.2: New USB device found, idVendor=5986, idProduct=02ac
[    2.564978] usb 1-1.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.565243] usb 1-1.2: Product: HP TrueVision HD
[    2.565387] usb 1-1.2: Manufacturer: HP TrueVision HD
[    2.565530] usb 1-1.2: SerialNumber: 0x0003
[    2.577032] Refined TSC clocksource calibration: 2095.240 MHz.
[    2.577189] Switching to clocksource tsc
[    2.615865] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400
[    2.641189] usb 2-1.4: new high-speed USB device number 3 using ehci_hcd
[    2.677172] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4
[    2.857399] usb 2-1.4: New USB device found, idVendor=054c, idProduct=05ba
[    2.857553] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.857798] usb 2-1.4: Product: Storage Media
[    2.857936] usb 2-1.4: Manufacturer: Sony
[    2.858068] usb 2-1.4: SerialNumber: CB3001208230047697
[    2.931715] usb 2-1.5: new full-speed USB device number 4 using ehci_hcd
[    3.022041] usb 2-1.5: New USB device found, idVendor=8086, idProduct=0189
[    3.022192] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    7.005557] ata1: link is slow to respond, please be patient (ready=0)
[   11.690574] ata1: COMRESET failed (errno=-16)
[   14.388585] ata1: SATA link down (SStatus 0 SControl 300)
[   14.404632] Freeing unused kernel memory: 8720k freed
[   14.407728] Write protecting the kernel read-only data: 12288k
[   14.418018] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[   14.418236] ata1: irq_stat 0x00000040, connection status changed
[   14.418400] ata1: SError: { CommWake DevExch }
[   14.418548] ata1: hard resetting link
[   14.420392] Freeing unused kernel memory: 1316k freed
[   14.429749] Freeing unused kernel memory: 948k freed
[   14.802363] wmi: Mapper loaded
[   14.803882] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   14.804052] r8169 0000:07:00.0: irq 42 for MSI/MSI-X
[   14.804314] r8169 0000:07:00.0: eth0: RTL8168evl/8111evl at 0xffffc9001166e000, 2c:27:d7:bc:82:30, XID 0c900800 IRQ 42
[   14.804320] r8169 0000:07:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[   14.806755] [drm] Initialized drm 1.1.0 20060810
[   14.818034] i915 0000:00:02.0: setting latency timer to 64
[   14.824543] Initializing USB Mass Storage driver...
[   14.833219] [drm] radeon defaulting to kernel modesetting.
[   14.833223] [drm] radeon kernel modesetting enabled.
[   14.833239] VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[   14.833287] radeon 0000:01:00.0: enabling device (0000 -> 0003)
[   14.838949] scsi6 : usb-storage 2-1.4:1.0
[   14.839075] usbcore: registered new interface driver usb-storage
[   14.839078] USB Mass Storage support registered.
[   14.862907] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[   14.862917] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   14.862919] [drm] Driver supports precise vblank timestamp query.
[   14.864358] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   14.864361] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[   15.186225] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   15.329298] fbcon: inteldrmfb (fb0) is primary device
[   15.617085] Console: switching to colour frame buffer device 170x48
[   15.624386] fb0: inteldrmfb frame buffer device
[   15.624390] drm: registered panic notifier
[   15.625041] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[   15.746652] acpi device:2e: registered as cooling_device4
[   15.747193] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2c/LNXVIDEO:00/input/input5
[   15.747354] ACPI: Video Device [PEGP] (multi-head: yes  rom: no  post: no)
[   15.862481] acpi device:3b: registered as cooling_device5
[   15.863055] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input6
[   15.863195] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   15.863265] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   15.864042] [drm] initializing kernel modesetting (CAICOS 0x1002:0x6760 0x103C:0x3581).
[   15.864157] [drm] register mmio base: 0xC6400000
[   15.864164] [drm] register mmio size: 131072
[   15.864172] vga_switcheroo: enabled
[   15.864664] radeon atpx: version is 1
[   16.058962] scsi 6:0:0:0: Direct-Access     Sony     Storage Media    0100 PQ: 0 ANSI: 4
[   16.060726] sd 6:0:0:0: Attached scsi generic sg0 type 0
[   16.061436] sd 6:0:0:0: [sda] 15257088 512-byte logical blocks: (7.81 GB/7.27 GiB)
[   16.062292] sd 6:0:0:0: [sda] Write Protect is off
[   16.062301] sd 6:0:0:0: [sda] Mode Sense: 43 00 00 00
[   16.062919] sd 6:0:0:0: [sda] No Caching mode page present
[   16.062927] sd 6:0:0:0: [sda] Assuming drive cache: write through
[   16.066057] sd 6:0:0:0: [sda] No Caching mode page present
[   16.066064] sd 6:0:0:0: [sda] Assuming drive cache: write through
[   16.067079]  sda: sda1
[   16.069534] sd 6:0:0:0: [sda] No Caching mode page present
[   16.069542] sd 6:0:0:0: [sda] Assuming drive cache: write through
[   16.069549] sd 6:0:0:0: [sda] Attached SCSI removable disk
[   16.755820] ATOM BIOS: HP/Flex
[   16.755905] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[   16.755915] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[   16.755952] mtrr: no more MTRRs available
[   16.755957] [drm] Detected VRAM RAM=1024M, BAR=256M
[   16.755962] [drm] RAM width 64bits DDR
[   16.756148] [TTM] Zone  kernel: Available graphics memory: 1997536 kiB
[   16.756153] [TTM] Initializing pool allocator
[   16.756181] [TTM] Initializing DMA pool allocator
[   16.756234] [drm] radeon: 1024M of VRAM memory ready
[   16.756239] [drm] radeon: 512M of GTT memory ready.
[   16.756270] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   16.757162] [drm] radeon: ib pool ready.
[   16.757344] [drm] Loading CAICOS Microcode
[   18.119124] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[   18.119343] radeon 0000:01:00.0: WB enabled
[   18.119352] [drm] fence driver on ring 0 use gpu addr 0x40000c00 and cpu addr 0xffff880154e89c00
[   18.119361] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   18.119365] [drm] Driver supports precise vblank timestamp query.
[   18.119450] radeon 0000:01:00.0: irq 44 for MSI/MSI-X
[   18.119479] radeon 0000:01:00.0: radeon: using MSI.
[   18.119560] [drm] radeon: irq initialized.
[   18.136844] [drm] ring test on 0 succeeded in 1 usecs
[   18.137444] [drm] ib test on ring 0 succeeded in 0 usecs
[   18.137944] [drm] Radeon Display Connectors
[   18.140122] [drm] Internal thermal controller with fan control
[   18.141506] [drm] radeon: power management initialized
[   18.141597] No connectors reported connected with modes
[   18.141604] [drm] Cannot find any crtc or sizes - going 1024x768
[   18.143798] [drm] fb mappable at 0xA0142000
[   18.143802] [drm] vram apper at 0xA0000000
[   18.143814] [drm] size 3145728
[   18.143819] [drm] fb depth is 24
[   18.143823] [drm]    pitch is 4096
[   18.143976] fb1: radeondrmfb frame buffer device
[   18.143987] [drm] Initialized radeon 2.16.0 20080528 for 0000:01:00.0 on minor 1
[   20.181931] ata1: link is slow to respond, please be patient (ready=0)
[   24.408637] ata1: COMRESET failed (errno=-16)
[   24.408648] ata1: hard resetting link
[   24.976203] md: linear personality registered for level -1
[   24.979178] md: multipath personality registered for level -4
[   24.980603] md: raid0 personality registered for level 0
[   24.982434] md: raid1 personality registered for level 1
[   24.983820] async_tx: api initialized (async)
[   24.984491] xor: automatically using best checksumming function: generic_sse
[   24.988621]    generic_sse:  5296.000 MB/sec
[   24.988625] xor: using function: generic_sse (5296.000 MB/sec)
[   25.007604] raid6: int64x1   1265 MB/s
[   25.024603] raid6: int64x2   1261 MB/s
[   25.041561] raid6: int64x4   1152 MB/s
[   25.058533] raid6: int64x8    890 MB/s
[   25.075503] raid6: sse2x1    3195 MB/s
[   25.092463] raid6: sse2x2    3941 MB/s
[   25.109452] raid6: sse2x4    4488 MB/s
[   25.109456] raid6: using algorithm sse2x4 (4488 MB/s)
[   25.114682] md: raid6 personality registered for level 6
[   25.114689] md: raid5 personality registered for level 5
[   25.114694] md: raid4 personality registered for level 4
[   25.125319] md: raid10 personality registered for level 10
[   25.469702] UDF-fs: warning (device sda): udf_fill_super: No partition found (1)
[   25.881350] aufs test_add:294:mount[401]: uid/gid/perm /squashfs 0/0/0755, 0/0/01777
[   25.889347] aufs test_add:294:mount[409]: uid/gid/perm /boot 0/0/0755, 0/0/01777
[   29.344985] systemd-udevd[867]: starting version 200
[   29.756393] ACPI Warning: 0x0000000000006040-0x000000000000605f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
[   29.756405] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   29.843865] iTCO_vendor_support: vendor-support=0
[   29.847202] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[   29.847281] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[   29.847345] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   29.852725] systemd-udevd[896]: renamed network interface eth0 to eno1
[   29.857694] hp_accel: laptop model unknown, using default axes configuration
[   30.079308] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x15
[   30.082150] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x15
[   30.082815] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x15
[   30.083399] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x15
[   30.083920] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[   30.109279] cfg80211: Calling CRDA to update world regulatory domain
[   30.111987] Bluetooth: Core ver 2.16
[   30.112005] NET: Registered protocol family 31
[   30.112008] Bluetooth: HCI device and connection manager initialized
[   30.112011] Bluetooth: HCI socket layer initialized
[   30.112014] Bluetooth: L2CAP socket layer initialized
[   30.112019] Bluetooth: SCO socket layer initialized
[   30.132044] ata1: link is slow to respond, please be patient (ready=0)
[   30.160070] input: HP WMI hotkeys as /devices/virtual/input/input7
[   30.167017] usbcore: registered new interface driver btusb
[   30.217030] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
[   30.217033] Copyright(c) 2003-2012 Intel Corporation
[   30.217170] iwlwifi 0000:0d:00.0: pci_resource_len = 0x00002000
[   30.217172] iwlwifi 0000:0d:00.0: pci_resource_base = ffffc90011734000
[   30.217174] iwlwifi 0000:0d:00.0: HW Revision ID = 0x34
[   30.217310] iwlwifi 0000:0d:00.0: irq 45 for MSI/MSI-X
[   30.265256] iwlwifi 0000:0d:00.0: loaded firmware version 18.168.6.1
[   30.265594] iwlwifi 0000:0d:00.0: CONFIG_IWLWIFI_DEBUG enabled
[   30.265600] iwlwifi 0000:0d:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[   30.265605] iwlwifi 0000:0d:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[   30.265610] iwlwifi 0000:0d:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
[   30.265615] iwlwifi 0000:0d:00.0: CONFIG_IWLWIFI_P2P disabled
[   30.265623] iwlwifi 0000:0d:00.0: Detected Intel(R) Centrino(R) Wireless-N 1030 BGN, REV=0xB0
[   30.265912] iwlwifi 0000:0d:00.0: L1 Enabled; Disabling L0S
[   30.281967] iwlwifi 0000:0d:00.0: device EEPROM VER=0x716, CALIB=0x6
[   30.282010] iwlwifi 0000:0d:00.0: Device SKU: 0x150
[   30.282019] iwlwifi 0000:0d:00.0: Valid Tx ant: 0x1, Valid Rx ant: 0x3
[   30.282069] iwlwifi 0000:0d:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
[   30.282275] Registered led device: phy0-led
[   30.293185] lis3lv02d: 8 bits 3DC sensor found
[   30.638158] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   30.652540] systemd-udevd[883]: renamed network interface wlan0 to wlo1
[   30.716401] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input8
[   30.716951] Registered led device: hp::hddprotect
[   30.716999] hp_accel: driver loaded
[   33.849525] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   37.639499] ata1.00: failed to enable AA (error_mask=0x1)
[   37.639511] ata1.00: ATA-8: ST9500325AS, 0005, max UDMA/100
[   37.639518] ata1.00: 0 sectors, multi 16: LBA NCQ (depth 31/32)
[   37.640699] ata1.00: failed to enable AA (error_mask=0x1)
[   37.640715] ata1.00: configured for UDMA/100 (device error ignored)
[   37.640748] ata1: EH complete
[   37.641056] scsi 0:0:0:0: Direct-Access     ATA      ST9500325AS      0005 PQ: 0 ANSI: 5
[   37.641527] sd 0:0:0:0: Attached scsi generic sg1 type 0
[   37.641717] sd 0:0:0:0: [sdb] 0 512-byte logical blocks: (0 B/0 B)
[   37.641992] sd 0:0:0:0: [sdb] Write Protect is off
[   37.642003] sd 0:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   37.642092] sd 0:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   37.642748] sd 0:0:0:0: [sdb] Attached SCSI disk
[   52.484904] warning: process `hwsetup' used the deprecated sysctl system call with 1.23.
[   52.572077] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   54.807151] r8169 0000:07:00.0: eno1: link down
[   54.807490] ADDRCONF(NETDEV_UP): eno1: link is not ready
[   54.809763] iwlwifi 0000:0d:00.0: L1 Enabled; Disabling L0S
[   54.816608] iwlwifi 0000:0d:00.0: Radio type=0x2-0x2-0x1
[   54.901933] iwlwifi 0000:0d:00.0: L1 Enabled; Disabling L0S
[   54.908853] iwlwifi 0000:0d:00.0: Radio type=0x2-0x2-0x1
[   55.011847] ADDRCONF(NETDEV_UP): wlo1: link is not ready
[   59.114623] md: Autodetecting RAID arrays.
[   59.114628] md: Scanned 0 and added 0 devices.
[   59.114631] md: autorun ...
[   59.114633] md: ... autorun DONE.
[   78.610233] wlo1: authenticate with 08:86:3b:0a:35:16
[   78.621290] wlo1: send auth to 08:86:3b:0a:35:16 (try 1/3)
[   78.624149] wlo1: authenticated
[   78.624769] wlo1: associate with 08:86:3b:0a:35:16 (try 1/3)
[   78.628698] wlo1: RX AssocResp from 08:86:3b:0a:35:16 (capab=0x411 status=0 aid=3)
[   78.632714] wlo1: associated
[   78.633608] ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[   89.297915] wlo1: no IPv6 routers present
[  101.019290] NILFS version 2 loaded
[  376.920061] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[  376.921462] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[  376.925054] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[  376.969612] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[  376.971069] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[  376.971072] psmouse serio1: issuing reconnect request


Code: Select all

[email protected] /root % smartctl -a /dev/sdb                                               
smartctl 5.42 2011-10-20 r3458 [x86_64-linux-3.4.52-std371-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Momentus 5400.6
Device Model:     ST9500325AS
Serial Number:    6VEQXA4B
LU WWN Device Id: 5 000c50 036b8e640
Firmware Version: 0005
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Sat Aug 31 07:46:17 2013 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

Error SMART Values Read failed: scsi error aborted command
Smartctl: SMART Read Values failed.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: UNKNOWN!
SMART Status, Attributes and Thresholds cannot be read.

Read SMART Log Directory failed.

Error SMART Error Log Read failed: scsi error aborted command
Smartctl: SMART Error Log Read Failed
Error SMART Error Self-Test Log Read failed: scsi error aborted command
Smartctl: SMART Self Test Log Read Failed
Device does not support Selective Self Tests/Logging


Code: Select all

[email protected] /root % hdparm -i /dev/sdb 

/dev/sdb:

 Model=ST9500325AS, FwRev=0005, SerialNo=6VEQXA4B
 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
 RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
 BuffType=unknown, BuffSize=8192kB, MaxMultSect=16, MultSect=16
 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=0
 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
 PIO modes:  pio0 pio1 pio2 pio3 pio4
 DMA modes:  mdma0 mdma1 *mdma2
 UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5
 AdvancedPM=yes: unknown setting WriteCache=enabled
 Drive conforms to: unknown:  ATA/ATAPI-3,4,5,6,7

 * signifies the current active mode



Any help would be great. I just need to recover as much data as possible. It is a Seagate drive on my HP DV 6 6115. It passes SMART test on doing a hard disk test but I get error 305 on the other tests.


Thanks.

gernot
Posts: 1127
Joined: 07 Apr 2010, 16:19

Re: Need to detect hard drive to recover data; unable to do

Postby gernot » 31 Aug 2013, 07:34

The Interface between harddisk /dev/hdb and the PC dont work correct.

>>>>Error SMART Values Read failed: scsi error aborted command

Can you recheck with other hardware or set the interface speed jumper on the HD.

Gernot


Return to “Hardware and drivers”

Who is online

Users browsing this forum: No registered users and 8 guests