Need to detect hard drive to recover data; unable to do so

Questions about problems with your hardware. For example, if you the kernel hangs during boot because of an hardware failure or if you have a problem with a driver not working or missing.
Post Reply
jenko
Posts: 1
Joined: 31 Aug 2013, 02:12

Need to detect hard drive to recover data; unable to do so

Post by jenko » 31 Aug 2013, 02:19

New to Linux. Read a lot around and finally giving up and creating a thread. Here are the results of the few commands I ran on the Terminal. Please note, the hard drive is not showing up on TestDisk.

Code: Select all

[email protected] /root % dmesg                                                              
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.4.52-std371-amd64 ([email protected]) (gcc version 4.4.7 (Gentoo 4.4.7 p1.2, pie-0.4.5) ) #2 SMP Wed Jul 3 20:35:57 UTC 2013
[    0.000000] Command line: dostartx initrd=initram.igz BOOT_IMAGE=rescue64 
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[    0.000000]  BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000009ce3f000 (usable)
[    0.000000]  BIOS-e820: 000000009ce3f000 - 000000009cebf000 (reserved)
[    0.000000]  BIOS-e820: 000000009cebf000 - 000000009cfbf000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000009cfbf000 - 000000009cfff000 (ACPI data)
[    0.000000]  BIOS-e820: 000000009cfff000 - 000000009d000000 (usable)
[    0.000000]  BIOS-e820: 000000009d000000 - 000000009fa00000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 000000015fe00000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Hewlett-Packard HP Pavilion dv6 Notebook PC/3581, BIOS F.13 04/25/2011
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x15fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FE0000000 write-back
[    0.000000]   2 base 09D000000 mask FFF000000 uncachable
[    0.000000]   3 base 09E000000 mask FFE000000 uncachable
[    0.000000]   4 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   5 base 100000000 mask FC0000000 write-back
[    0.000000]   6 base 140000000 mask FF0000000 write-back
[    0.000000]   7 base 150000000 mask FF0000000 write-back
[    0.000000]   8 base 15FE00000 mask FFFE00000 uncachable
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] last_pfn = 0x9d000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000fe1b0] fe1b0
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] init_memory_mapping: 0000000000000000-000000009d000000
[    0.000000]  0000000000 - 009d000000 page 2M
[    0.000000] kernel direct mapping tables up to 0x9cffffff @ [mem 0x1fffc000-0x1fffffff]
[    0.000000] init_memory_mapping: 0000000100000000-000000015fe00000
[    0.000000]  0100000000 - 015fe00000 page 2M
[    0.000000] kernel direct mapping tables up to 0x15fdfffff @ [mem 0x9ce3c000-0x9ce3efff]
[    0.000000] RAMDISK: 7f4d6000 - 7ffff000
[    0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 000000009cffe120 00094 (v01 HPQOEM SLIC-MPC 00000001      01000013)
[    0.000000] ACPI: FACP 000000009cffc000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: DSDT 000000009cfec000 0C553 (v01 HP     INSYDE   00000000 MSFT 01000013)
[    0.000000] ACPI: FACS 000000009cf6c000 00040
[    0.000000] ACPI: ASF! 000000009cffd000 000A5 (v32 HP     INSYDE   00000001 MSFT 01000013)
[    0.000000] ACPI: HPET 000000009cffb000 00038 (v01 HP     INSYDE   00000001 MSFT 01000013)
[    0.000000] ACPI: APIC 000000009cffa000 0008C (v02 HP     INSYDE   00000001 MSFT 01000013)
[    0.000000] ACPI: MCFG 000000009cff9000 0003C (v01 HP     INSYDE   00000001 MSFT 01000013)
[    0.000000] ACPI: SLIC 000000009cfeb000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: SSDT 000000009cfea000 0051F (v01 HP     INSYDE   00001000 MSFT 01000013)
[    0.000000] ACPI: BOOT 000000009cfe8000 00028 (v01 HP     INSYDE   00000001 MSFT 01000013)
[    0.000000] ACPI: ASPT 000000009cfe5000 00034 (v07 HP     INSYDE   00000001 MSFT 01000013)
[    0.000000] ACPI: SSDT 000000009cfe4000 0090C (v01 HP     INSYDE   00003000 INTL 20100806)
[    0.000000] ACPI: SSDT 000000009cfe3000 00996 (v01 HP     INSYDE   00003000 INTL 20100806)
[    0.000000] ACPI: SSDT 000000009cfe2000 002DA (v01 HP     INSYDE   00003000 INTL 20100806)
[    0.000000] ACPI: SSDT 000000009cfe1000 0035D (v01 HP     INSYDE   00003000 INTL 20100806)
[    0.000000] ACPI: SSDT 000000009cfdb000 024A1 (v01 HP     INSYDE   00001000 INTL 20100806)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000015fe00000
[    0.000000] Initmem setup node 0 0000000000000000-000000015fe00000
[    0.000000]   NODE_DATA [mem 0x15fdec000-0x15fdfffff]
[    0.000000]  [ffffea0000000000-ffffea00057fffff] PMD -> [ffff88015b400000-ffff88015f3fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x0015fe00
[    0.000000] Movable zone start PFN for each node
[    0.000000] Early memory PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x0009ce3f
[    0.000000]     0: 0x0009cfff -> 0x0009d000
[    0.000000]     0: 0x00100000 -> 0x0015fe00
[    0.000000] On node 0 totalpages: 1035213
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 141 pages reserved
[    0.000000]   DMA zone: 3776 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 16320 pages used for memmap
[    0.000000]   DMA32 zone: 622208 pages, LIFO batch:31
[    0.000000]   Normal zone: 6136 pages used for memmap
[    0.000000]   Normal zone: 386568 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] Allocating PCI resources starting at 9fa00000 (gap: 9fa00000:40600000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88015fa00000 s83008 r8192 d23488 u262144
[    0.000000] pcpu-alloc: s83008 r8192 d23488 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1012552
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: dostartx initrd=initram.igz BOOT_IMAGE=rescue64 
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Memory: 3972660k/5765120k available (6855k kernel code, 1624268k absent, 168192k reserved, 6397k data, 8720k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:16640 nr_irqs:744 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 16777216 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.001000] Detected 2095.250 MHz processor.
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4190.50 BogoMIPS (lpj=2095250)
[    0.000211] pid_max: default: 32768 minimum: 301
[    0.000337] Security Framework initialized
[    0.000442] SELinux:  Disabled at boot.
[    0.000904] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.002133] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.002695] Mount-cache hash table entries: 256
[    0.003010] Initializing cgroup subsys cpuacct
[    0.003109] Initializing cgroup subsys memory
[    0.003232] Initializing cgroup subsys devices
[    0.003331] Initializing cgroup subsys freezer
[    0.003430] Initializing cgroup subsys net_cls
[    0.003529] Initializing cgroup subsys blkio
[    0.003631] Initializing cgroup subsys perf_event
[    0.003757] CPU: Physical Processor ID: 0
[    0.003854] CPU: Processor Core ID: 0
[    0.003954] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.003955] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.004169] mce: CPU supports 7 MCE banks
[    0.004274] CPU0: Thermal monitoring handled by SMI
[    0.004282] using mwait in idle threads.
[    0.005835] ACPI: Core revision 20120320
[    0.026571] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.036660] CPU0: Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz stepping 07
[    0.137964] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[    0.138281] PEBS disabled due to CPU errata.
[    0.138380] ... version:                3
[    0.138477] ... bit width:              48
[    0.138574] ... generic registers:      4
[    0.138672] ... value mask:             0000ffffffffffff
[    0.138771] ... max period:             000000007fffffff
[    0.138870] ... fixed-purpose events:   3
[    0.138969] ... event mask:             000000070000000f
[    0.139250] NMI watchdog: enabled, takes one hw-pmu counter.
[    0.139431] Booting Node   0, Processors  #1
[    0.150542] CPU1: Thermal monitoring handled by SMI
[    0.152643] NMI watchdog: enabled, takes one hw-pmu counter.
[    0.152923]  #2
[    0.164091] CPU2: Thermal monitoring handled by SMI
[    0.166186] NMI watchdog: enabled, takes one hw-pmu counter.
[    0.166456]  #3
[    0.177618] CPU3: Thermal monitoring handled by SMI
[    0.179713] NMI watchdog: enabled, takes one hw-pmu counter.
[    0.179934] Brought up 4 CPUs
[    0.180030] Total of 4 processors activated (16762.00 BogoMIPS).
[    0.183828] devtmpfs: initialized
[    0.184149] PM: Registering ACPI NVS region [mem 0x9cebf000-0x9cfbefff] (1048576 bytes)
[    0.185481] atomic64 test passed for x86-64 platform with CX8 and with SSE
[    0.185613] RTC time:  6:41:06, date: 08/31/13
[    0.185754] NET: Registered protocol family 16
[    0.186093] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.186247] ACPI: bus type pci registered
[    0.186422] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.186579] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.212046] PCI: Using configuration type 1 for base access
[    0.213309] bio: create slab <bio-0> at 0
[    0.213476] ACPI: Added _OSI(Module Device)
[    0.213574] ACPI: Added _OSI(Processor Device)
[    0.213673] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.213772] ACPI: Added _OSI(Processor Aggregator Device)
[    0.215618] ACPI: EC: Look up EC in DSDT
[    0.217306] ACPI: Executed 1 blocks of module-level executable AML code
[    0.227902] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.228577] ACPI: SSDT 000000009ce70798 00727 (v01  PmRef  Cpu0Cst 00003001 INTL 20100806)
[    0.229275] ACPI: Dynamic OEM Table Load:
[    0.229454] ACPI: SSDT           (null) 00727 (v01  PmRef  Cpu0Cst 00003001 INTL 20100806)
[    0.233138] ACPI: SSDT 000000009ce71a98 00303 (v01  PmRef    ApIst 00003000 INTL 20100806)
[    0.233877] ACPI: Dynamic OEM Table Load:
[    0.234052] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20100806)
[    0.237969] ACPI: SSDT 000000009ce6fd98 00119 (v01  PmRef    ApCst 00003000 INTL 20100806)
[    0.238659] ACPI: Dynamic OEM Table Load:
[    0.238840] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20100806)
[    0.246988] ACPI: Interpreter enabled
[    0.247088] ACPI: (supports S0 S3 S5)
[    0.247323] ACPI: Using IOAPIC for interrupt routing
[    0.256621] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.257136] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[    0.257239] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.257745] \_SB_.PCI0:_OSC invalid UUID
[    0.257747] _OSC request data:1 8 0 
[    0.257751] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.258422] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.258526] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.258628] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.258786] pci_root PNP0A08:00: host bridge window [mem 0x9fa00000-0xfeafffff]
[    0.258971] PCI host bridge to bus 0000:00
[    0.259069] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.259171] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.259273] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.259376] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
[    0.259486] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.259526] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.259561] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.259582] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[    0.259594] pci 0000:00:02.0: reg 10: [mem 0xc0000000-0xc03fffff 64bit]
[    0.259601] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.259606] pci 0000:00:02.0: reg 20: [io  0x6000-0x603f]
[    0.259664] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.259689] pci 0000:00:16.0: reg 10: [mem 0xc7404000-0xc740400f 64bit]
[    0.259773] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.259810] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.260145] pci 0000:00:1a.0: reg 10: [mem 0xc740a000-0xc740a3ff]
[    0.262083] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.262121] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.262138] pci 0000:00:1b.0: reg 10: [mem 0xc7400000-0xc7403fff 64bit]
[    0.262212] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.262240] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.262326] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.262354] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    0.262439] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.262469] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
[    0.262629] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.262673] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.263005] pci 0000:00:1d.0: reg 10: [mem 0xc7409000-0xc74093ff]
[    0.264957] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.265028] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[    0.265162] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.265183] pci 0000:00:1f.2: reg 10: [io  0x6098-0x609f]
[    0.265192] pci 0000:00:1f.2: reg 14: [io  0x60bc-0x60bf]
[    0.265201] pci 0000:00:1f.2: reg 18: [io  0x6090-0x6097]
[    0.265210] pci 0000:00:1f.2: reg 1c: [io  0x60b8-0x60bb]
[    0.265219] pci 0000:00:1f.2: reg 20: [io  0x6060-0x607f]
[    0.265228] pci 0000:00:1f.2: reg 24: [mem 0xc7408000-0xc74087ff]
[    0.265277] pci 0000:00:1f.2: PME# supported from D3hot
[    0.265298] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.265315] pci 0000:00:1f.3: reg 10: [mem 0xc7406000-0xc74060ff 64bit]
[    0.265338] pci 0000:00:1f.3: reg 20: [io  0x6040-0x605f]
[    0.265403] pci 0000:01:00.0: [1002:6760] type 00 class 0x030000
[    0.265420] pci 0000:01:00.0: reg 10: [mem 0xa0000000-0xafffffff 64bit pref]
[    0.265434] pci 0000:01:00.0: reg 18: [mem 0xc6400000-0xc641ffff 64bit]
[    0.265444] pci 0000:01:00.0: reg 20: [io  0x5000-0x50ff]
[    0.265461] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[    0.265502] pci 0000:01:00.0: supports D1 D2
[    0.266785] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.266890] pci 0000:00:01.0:   bridge window [io  0x5000-0x5fff]
[    0.266893] pci 0000:00:01.0:   bridge window [mem 0xc6400000-0xc73fffff]
[    0.266898] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[    0.266983] pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000
[    0.267006] pci 0000:07:00.0: reg 10: [io  0x4000-0x40ff]
[    0.267045] pci 0000:07:00.0: reg 18: [mem 0xc0404000-0xc0404fff 64bit pref]
[    0.267068] pci 0000:07:00.0: reg 20: [mem 0xc0400000-0xc0403fff 64bit pref]
[    0.267166] pci 0000:07:00.0: supports D1 D2
[    0.267168] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.269040] pci 0000:00:1c.0: PCI bridge to [bus 07-0c]
[    0.269159] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.269164] pci 0000:00:1c.0:   bridge window [mem 0xc5400000-0xc63fffff]
[    0.269171] pci 0000:00:1c.0:   bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
[    0.269381] pci 0000:0d:00.0: [8086:008b] type 00 class 0x028000
[    0.269539] pci 0000:0d:00.0: reg 10: [mem 0xc4400000-0xc4401fff 64bit]
[    0.270316] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold
[    0.272122] pci 0000:00:1c.1: PCI bridge to [bus 0d-12]
[    0.272223] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.272228] pci 0000:00:1c.1:   bridge window [mem 0xc4400000-0xc53fffff]
[    0.272235] pci 0000:00:1c.1:   bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
[    0.272309] pci 0000:13:00.0: [10ec:5209] type 00 class 0xff0000
[    0.272333] pci 0000:13:00.0: reg 10: [mem 0xc3400000-0xc3400fff]
[    0.272434] pci 0000:13:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
[    0.272509] pci 0000:13:00.0: supports D1 D2
[    0.272511] pci 0000:13:00.0: PME# supported from D1 D2 D3hot
[    0.274029] pci 0000:00:1c.2: PCI bridge to [bus 13-18]
[    0.274149] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.274153] pci 0000:00:1c.2:   bridge window [mem 0xc3400000-0xc43fffff]
[    0.274161] pci 0000:00:1c.2:   bridge window [mem 0xc2400000-0xc33fffff 64bit pref]
[    0.274183] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.274373] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.274412] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.274449] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    0.274503] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[    0.274604] \_SB_.PCI0:_OSC invalid UUID
[    0.274605] _OSC request data:1 1f 0 
[    0.274610]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.274746] \_SB_.PCI0:_OSC invalid UUID
[    0.274748] _OSC request data:1 0 1d 
[    0.274752]  pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[    0.274905] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.278791] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.279516] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 10 11 12 14 15)
[    0.280145] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 *4 5 6 10 11 12 14 15)
[    0.280769] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.281397] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.282157] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 *5 6 10 11 12 14 15)
[    0.282784] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.283411] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.284082] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.284243] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[    0.284398] vgaarb: loaded
[    0.284493] vgaarb: bridge control possible 0000:01:00.0
[    0.284592] vgaarb: no bridge control possible 0000:00:02.0
[    0.284768] SCSI subsystem initialized
[    0.284908] libata version 3.00 loaded.
[    0.284958] usbcore: registered new interface driver usbfs
[    0.285076] usbcore: registered new interface driver hub
[    0.285195] usbcore: registered new device driver usb
[    0.285346] PCI: Using ACPI for IRQ routing
[    0.294009] PCI: pci_cache_line_size set to 64 bytes
[    0.294137] reserve RAM buffer: 000000000009d800 - 000000000009ffff 
[    0.294142] reserve RAM buffer: 000000009ce3f000 - 000000009fffffff 
[    0.294144] reserve RAM buffer: 000000009d000000 - 000000009fffffff 
[    0.294146] reserve RAM buffer: 000000015fe00000 - 000000015fffffff 
[    0.294239] NetLabel: Initializing
[    0.294335] NetLabel:  domain hash size = 128
[    0.294432] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.294539] NetLabel:  unlabeled traffic allowed by default
[    0.294685] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.295146] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.297260] Switching to clocksource hpet
[    0.305776] pnp: PnP ACPI init
[    0.305888] ACPI: bus type pnp registered
[    0.306321] pnp 00:00: [bus 00-fe]
[    0.306324] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.306326] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.306328] pnp 00:00: [io  0x0d00-0xffff window]
[    0.306330] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.306332] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.306334] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.306336] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.306338] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.306342] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.306344] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.306346] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.306348] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.306350] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.306352] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.306354] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.306356] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.306358] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.306360] pnp 00:00: [mem 0x9fa00000-0xfeafffff window]
[    0.306446] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.306468] pnp 00:01: [io  0x0000-0x001f]
[    0.306470] pnp 00:01: [io  0x0081-0x0091]
[    0.306472] pnp 00:01: [io  0x0093-0x009f]
[    0.306474] pnp 00:01: [io  0x00c0-0x00df]
[    0.306476] pnp 00:01: [dma 4]
[    0.306497] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.306506] pnp 00:02: [mem 0xff000000-0xffffffff]
[    0.306528] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    0.306610] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[    0.306632] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.306642] pnp 00:04: [io  0x00f0]
[    0.306652] pnp 00:04: [irq 13]
[    0.306676] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.306687] pnp 00:05: [io  0x002e-0x002f]
[    0.306689] pnp 00:05: [io  0x004e-0x004f]
[    0.306690] pnp 00:05: [io  0x0061]
[    0.306692] pnp 00:05: [io  0x0063]
[    0.306694] pnp 00:05: [io  0x0065]
[    0.306695] pnp 00:05: [io  0x0067]
[    0.306697] pnp 00:05: [io  0x0070]
[    0.306698] pnp 00:05: [io  0x0080]
[    0.306700] pnp 00:05: [io  0x0092]
[    0.306701] pnp 00:05: [io  0x00b2-0x00b3]
[    0.306703] pnp 00:05: [io  0x0680-0x069f]
[    0.306705] pnp 00:05: [io  0x1000-0x100f]
[    0.306707] pnp 00:05: [io  0x1010-0x1013]
[    0.306708] pnp 00:05: [io  0xffff]
[    0.306710] pnp 00:05: [io  0x0400-0x0453]
[    0.306712] pnp 00:05: [io  0x0458-0x047f]
[    0.306713] pnp 00:05: [io  0x0500-0x057f]
[    0.306715] pnp 00:05: [io  0x164e-0x164f]
[    0.306765] system 00:05: [io  0x0680-0x069f] has been reserved
[    0.306866] system 00:05: [io  0x1000-0x100f] has been reserved
[    0.306967] system 00:05: [io  0x1010-0x1013] has been reserved
[    0.307068] system 00:05: [io  0xffff] has been reserved
[    0.307169] system 00:05: [io  0x0400-0x0453] has been reserved
[    0.307269] system 00:05: [io  0x0458-0x047f] has been reserved
[    0.307381] system 00:05: [io  0x0500-0x057f] has been reserved
[    0.307483] system 00:05: [io  0x164e-0x164f] has been reserved
[    0.307585] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.307594] pnp 00:06: [io  0x0070-0x0077]
[    0.307600] pnp 00:06: [irq 8]
[    0.307622] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.307643] pnp 00:07: [io  0x0454-0x0457]
[    0.307680] system 00:07: [io  0x0454-0x0457] has been reserved
[    0.307781] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.307814] pnp 00:08: [io  0x0060]
[    0.307816] pnp 00:08: [io  0x0064]
[    0.307823] pnp 00:08: [irq 1]
[    0.307847] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.307881] pnp 00:09: [irq 12]
[    0.307908] pnp 00:09: Plug and Play ACPI device, IDs SYN1e47 SYN1e00 SYN0002 PNP0f13 (active)
[    0.308015] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[    0.308017] pnp 00:0a: [mem 0xfed10000-0xfed17fff]
[    0.308019] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[    0.308021] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[    0.308023] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[    0.308025] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[    0.308027] pnp 00:0a: [mem 0xfed90000-0xfed93fff]
[    0.308028] pnp 00:0a: [mem 0xff000000-0xffffffff]
[    0.308030] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[    0.308032] pnp 00:0a: [mem 0x9fa00000-0x9fa00fff]
[    0.308074] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.308177] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.308279] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.308393] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.308495] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[    0.308598] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.308700] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.308803] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
[    0.308907] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.309009] system 00:0a: [mem 0x9fa00000-0x9fa00fff] has been reserved
[    0.309111] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.312760] pnp 00:0b: [irq 23]
[    0.312818] pnp 00:0b: Plug and Play ACPI device, IDs HPQ0004 (active)
[    0.312842] pnp 00:0c: [mem 0x20000000-0x201fffff]
[    0.312845] pnp 00:0c: [mem 0x40000000-0x401fffff]
[    0.312905] system 00:0c: [mem 0x20000000-0x201fffff] could not be reserved
[    0.313009] system 00:0c: [mem 0x40000000-0x401fffff] could not be reserved
[    0.313113] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.313133] pnp: PnP ACPI: found 13 devices
[    0.313230] ACPI: ACPI bus type pnp unregistered
[    0.320002] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[    0.320160] pci 0000:13:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[    0.320357] pci 0000:01:00.0: BAR 6: assigned [mem 0xc6420000-0xc643ffff pref]
[    0.320513] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.320613] pci 0000:00:01.0:   bridge window [io  0x5000-0x5fff]
[    0.320716] pci 0000:00:01.0:   bridge window [mem 0xc6400000-0xc73fffff]
[    0.320820] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[    0.320976] pci 0000:00:1c.0: PCI bridge to [bus 07-0c]
[    0.321077] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.321182] pci 0000:00:1c.0:   bridge window [mem 0xc5400000-0xc63fffff]
[    0.321286] pci 0000:00:1c.0:   bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
[    0.321452] pci 0000:00:1c.1: PCI bridge to [bus 0d-12]
[    0.321554] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.321659] pci 0000:00:1c.1:   bridge window [mem 0xc4400000-0xc53fffff]
[    0.321765] pci 0000:00:1c.1:   bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
[    0.321924] pci 0000:13:00.0: BAR 6: assigned [mem 0xc2400000-0xc240ffff pref]
[    0.322077] pci 0000:00:1c.2: PCI bridge to [bus 13-18]
[    0.322178] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.322283] pci 0000:00:1c.2:   bridge window [mem 0xc3400000-0xc43fffff]
[    0.322395] pci 0000:00:1c.2:   bridge window [mem 0xc2400000-0xc33fffff 64bit pref]
[    0.322589] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.322591] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.322593] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.322595] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
[    0.322598] pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
[    0.322600] pci_bus 0000:01: resource 1 [mem 0xc6400000-0xc73fffff]
[    0.322602] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
[    0.322604] pci_bus 0000:07: resource 0 [io  0x4000-0x4fff]
[    0.322606] pci_bus 0000:07: resource 1 [mem 0xc5400000-0xc63fffff]
[    0.322608] pci_bus 0000:07: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref]
[    0.322611] pci_bus 0000:0d: resource 0 [io  0x3000-0x3fff]
[    0.322613] pci_bus 0000:0d: resource 1 [mem 0xc4400000-0xc53fffff]
[    0.322615] pci_bus 0000:0d: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref]
[    0.322617] pci_bus 0000:13: resource 0 [io  0x2000-0x2fff]
[    0.322619] pci_bus 0000:13: resource 1 [mem 0xc3400000-0xc43fffff]
[    0.322621] pci_bus 0000:13: resource 2 [mem 0xc2400000-0xc33fffff 64bit pref]
[    0.322668] NET: Registered protocol family 2
[    0.322910] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.323962] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.325901] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.326215] TCP: Hash tables configured (established 524288 bind 65536)
[    0.326317] TCP: reno registered
[    0.326444] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.326568] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.326758] NET: Registered protocol family 1
[    0.326955] RPC: Registered named UNIX socket transport module.
[    0.327055] RPC: Registered udp transport module.
[    0.327153] RPC: Registered tcp transport module.
[    0.327251] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.327370] pci 0000:00:02.0: Boot video device
[    0.349416] PCI: CLS 64 bytes, default 64
[    0.358222] Unpacking initramfs...
[    1.575625] Freeing initrd memory: 11428k freed
[    1.577475] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.577600] Placing 64MB software IO TLB between ffff880098e3c000 - ffff88009ce3c000
[    1.577753] software IO TLB at phys 0x98e3c000 - 0x9ce3c000
[    1.577906] Simple Boot Flag at 0x44 set to 0x1
[    1.578966] audit: initializing netlink socket (disabled)
[    1.579075] type=2000 audit(1377931267.463:1): initialized
[    1.613127] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.615077] VFS: Disk quotas dquot_6.5.2
[    1.615217] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.615737] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.615962] NFS: Registering the id_resolver key type
[    1.616173] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.616281] NTFS driver 2.1.30 [Flags: R/O].
[    1.616481] fuse init (API version 7.18)
[    1.616736] JFS: nTxBlock = 8192, nTxLock = 65536
[    1.618533] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[    1.619278] Btrfs loaded
[    1.619480] aufs 3.4-20130506
[    1.619578] msgmni has been set to 7781
[    1.620014] alg: No test for stdrng (krng)
[    1.620121] NET: Registered protocol family 38
[    1.620258] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.620448] io scheduler noop registered
[    1.620548] io scheduler deadline registered
[    1.620698] io scheduler cfq registered (default)
[    1.620922] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    1.621118] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.621232] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.621334] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    1.621578] acpiphp_glue: can't evaluate _ADR (0x5)
[    1.621946] intel_idle: MWAIT substates: 0x21120
[    1.621948] intel_idle: v0.4 model 0x2A
[    1.621950] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.624105] ACPI: AC Adapter [AC] (on-line)
[    1.624291] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input0
[    1.626052] ACPI: Lid Switch [LID]
[    1.626214] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.626370] ACPI: Power Button [PWRB]
[    1.626548] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.626702] ACPI: Power Button [PWRF]
[    1.627076] ACPI: Requesting acpi_cpufreq
[    1.645399] thermal LNXTHERM:00: registered as thermal_zone0
[    1.645503] ACPI: Thermal Zone [THRM] (60 C)
[    1.645625] GHES: HEST is not enabled!
[    1.645799] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.652271] Non-volatile memory driver v1.3
[    1.652382] Linux agpgart interface v0.103
[    1.654171] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[    1.654344] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    1.655533] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[    1.655783] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[    1.656650] loop: module loaded
[    1.656840] ahci 0000:00:1f.2: version 3.0
[    1.656900] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    1.656954] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
[    1.657110] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst 
[    1.657310] ahci 0000:00:1f.2: setting latency timer to 64
[    1.657825] scsi0 : ahci
[    1.658004] scsi1 : ahci
[    1.658159] scsi2 : ahci
[    1.658315] scsi3 : ahci
[    1.658488] scsi4 : ahci
[    1.658643] scsi5 : ahci
[    1.658833] ata1: SATA max UDMA/133 abar [email protected] port 0xc7408100 irq 41
[    1.659032] ata2: DUMMY
[    1.659137] ata3: DUMMY
[    1.659247] ata4: DUMMY
[    1.659373] ata5: DUMMY
[    1.659479] ata6: DUMMY
[    1.659691] Fixed MDIO Bus: probed
[    1.659875] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.660001] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.660005] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    1.660152] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.660378] ehci_hcd 0000:00:1a.0: debug port 2
[    1.664391] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    1.664408] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc740a000
[    1.670368] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.670560] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.670700] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.670852] usb usb1: Product: EHCI Host Controller
[    1.670951] usb usb1: Manufacturer: Linux 3.4.52-std371-amd64 ehci_hcd
[    1.671053] usb usb1: SerialNumber: 0000:00:1a.0
[    1.671246] hub 1-0:1.0: USB hub found
[    1.671366] hub 1-0:1.0: 2 ports detected
[    1.671578] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.671581] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    1.671758] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.671972] ehci_hcd 0000:00:1d.0: debug port 2
[    1.675089] ACPI: Battery Slot [BAT0] (battery present)
[    1.675941] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    1.675955] ehci_hcd 0000:00:1d.0: irq 20, io mem 0xc7409000
[    1.681351] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.681482] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.681584] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.681737] usb usb2: Product: EHCI Host Controller
[    1.681836] usb usb2: Manufacturer: Linux 3.4.52-std371-amd64 ehci_hcd
[    1.681937] usb usb2: SerialNumber: 0000:00:1d.0
[    1.682118] hub 2-0:1.0: USB hub found
[    1.682216] hub 2-0:1.0: 2 ports detected
[    1.682380] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.682489] uhci_hcd: USB Universal Host Controller Interface driver
[    1.682638] usbcore: registered new interface driver usbserial
[    1.682746] usbcore: registered new interface driver usbserial_generic
[    1.682853] USB Serial support registered for generic
[    1.682952] usbserial: USB Serial Driver core
[    1.683091] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.691146] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.691249] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.691439] mousedev: PS/2 mouse device common for all mice
[    1.691710] rtc_cmos 00:06: RTC can wake from S4
[    1.691936] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    1.692073] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.692249] device-mapper: uevent: version 1.0.3
[    1.692421] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
[    1.692705] cpuidle: using governor ladder
[    1.692925] cpuidle: using governor menu
[    1.693161] EFI Variables Facility v0.08 2004-May-17
[    1.693382] usbcore: registered new interface driver usbhid
[    1.693481] usbhid: USB HID core driver
[    1.693677] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.693790] TCP: cubic registered
[    1.693885] Initializing XFRM netlink socket
[    1.694108] NET: Registered protocol family 10
[    1.694404] Mobile IPv6
[    1.694500] NET: Registered protocol family 17
[    1.694630] Registering the dns_resolver key type
[    1.694983] registered taskstats version 1
[    1.695706]   Magic number: 9:110:672
[    1.695903] rtc_cmos 00:06: setting system clock to 2013-08-31 06:41:07 UTC (1377931267)
[    1.696332] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.697167] Initializing network drop monitor service
[    1.973051] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    2.087649] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    2.087833] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.088462] hub 1-1:1.0: USB hub found
[    2.088693] hub 1-1:1.0: 6 ports detected
[    2.191713] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[    2.306009] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    2.306169] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.306693] hub 2-1:1.0: USB hub found
[    2.307036] hub 2-1:1.0: 6 ports detected
[    2.381741] usb 1-1.2: new high-speed USB device number 3 using ehci_hcd
[    2.564811] usb 1-1.2: New USB device found, idVendor=5986, idProduct=02ac
[    2.564978] usb 1-1.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.565243] usb 1-1.2: Product: HP TrueVision HD
[    2.565387] usb 1-1.2: Manufacturer: HP TrueVision HD
[    2.565530] usb 1-1.2: SerialNumber: 0x0003
[    2.577032] Refined TSC clocksource calibration: 2095.240 MHz.
[    2.577189] Switching to clocksource tsc
[    2.615865] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400
[    2.641189] usb 2-1.4: new high-speed USB device number 3 using ehci_hcd
[    2.677172] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4
[    2.857399] usb 2-1.4: New USB device found, idVendor=054c, idProduct=05ba
[    2.857553] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.857798] usb 2-1.4: Product: Storage Media
[    2.857936] usb 2-1.4: Manufacturer: Sony
[    2.858068] usb 2-1.4: SerialNumber: CB3001208230047697
[    2.931715] usb 2-1.5: new full-speed USB device number 4 using ehci_hcd
[    3.022041] usb 2-1.5: New USB device found, idVendor=8086, idProduct=0189
[    3.022192] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    7.005557] ata1: link is slow to respond, please be patient (ready=0)
[   11.690574] ata1: COMRESET failed (errno=-16)
[   14.388585] ata1: SATA link down (SStatus 0 SControl 300)
[   14.404632] Freeing unused kernel memory: 8720k freed
[   14.407728] Write protecting the kernel read-only data: 12288k
[   14.418018] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[   14.418236] ata1: irq_stat 0x00000040, connection status changed
[   14.418400] ata1: SError: { CommWake DevExch }
[   14.418548] ata1: hard resetting link
[   14.420392] Freeing unused kernel memory: 1316k freed
[   14.429749] Freeing unused kernel memory: 948k freed
[   14.802363] wmi: Mapper loaded
[   14.803882] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   14.804052] r8169 0000:07:00.0: irq 42 for MSI/MSI-X
[   14.804314] r8169 0000:07:00.0: eth0: RTL8168evl/8111evl at 0xffffc9001166e000, 2c:27:d7:bc:82:30, XID 0c900800 IRQ 42
[   14.804320] r8169 0000:07:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[   14.806755] [drm] Initialized drm 1.1.0 20060810
[   14.818034] i915 0000:00:02.0: setting latency timer to 64
[   14.824543] Initializing USB Mass Storage driver...
[   14.833219] [drm] radeon defaulting to kernel modesetting.
[   14.833223] [drm] radeon kernel modesetting enabled.
[   14.833239] VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[   14.833287] radeon 0000:01:00.0: enabling device (0000 -> 0003)
[   14.838949] scsi6 : usb-storage 2-1.4:1.0
[   14.839075] usbcore: registered new interface driver usb-storage
[   14.839078] USB Mass Storage support registered.
[   14.862907] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[   14.862917] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   14.862919] [drm] Driver supports precise vblank timestamp query.
[   14.864358] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   14.864361] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[   15.186225] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   15.329298] fbcon: inteldrmfb (fb0) is primary device
[   15.617085] Console: switching to colour frame buffer device 170x48
[   15.624386] fb0: inteldrmfb frame buffer device
[   15.624390] drm: registered panic notifier
[   15.625041] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[   15.746652] acpi device:2e: registered as cooling_device4
[   15.747193] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2c/LNXVIDEO:00/input/input5
[   15.747354] ACPI: Video Device [PEGP] (multi-head: yes  rom: no  post: no)
[   15.862481] acpi device:3b: registered as cooling_device5
[   15.863055] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input6
[   15.863195] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   15.863265] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   15.864042] [drm] initializing kernel modesetting (CAICOS 0x1002:0x6760 0x103C:0x3581).
[   15.864157] [drm] register mmio base: 0xC6400000
[   15.864164] [drm] register mmio size: 131072
[   15.864172] vga_switcheroo: enabled
[   15.864664] radeon atpx: version is 1
[   16.058962] scsi 6:0:0:0: Direct-Access     Sony     Storage Media    0100 PQ: 0 ANSI: 4
[   16.060726] sd 6:0:0:0: Attached scsi generic sg0 type 0
[   16.061436] sd 6:0:0:0: [sda] 15257088 512-byte logical blocks: (7.81 GB/7.27 GiB)
[   16.062292] sd 6:0:0:0: [sda] Write Protect is off
[   16.062301] sd 6:0:0:0: [sda] Mode Sense: 43 00 00 00
[   16.062919] sd 6:0:0:0: [sda] No Caching mode page present
[   16.062927] sd 6:0:0:0: [sda] Assuming drive cache: write through
[   16.066057] sd 6:0:0:0: [sda] No Caching mode page present
[   16.066064] sd 6:0:0:0: [sda] Assuming drive cache: write through
[   16.067079]  sda: sda1
[   16.069534] sd 6:0:0:0: [sda] No Caching mode page present
[   16.069542] sd 6:0:0:0: [sda] Assuming drive cache: write through
[   16.069549] sd 6:0:0:0: [sda] Attached SCSI removable disk
[   16.755820] ATOM BIOS: HP/Flex
[   16.755905] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[   16.755915] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[   16.755952] mtrr: no more MTRRs available
[   16.755957] [drm] Detected VRAM RAM=1024M, BAR=256M
[   16.755962] [drm] RAM width 64bits DDR
[   16.756148] [TTM] Zone  kernel: Available graphics memory: 1997536 kiB
[   16.756153] [TTM] Initializing pool allocator
[   16.756181] [TTM] Initializing DMA pool allocator
[   16.756234] [drm] radeon: 1024M of VRAM memory ready
[   16.756239] [drm] radeon: 512M of GTT memory ready.
[   16.756270] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   16.757162] [drm] radeon: ib pool ready.
[   16.757344] [drm] Loading CAICOS Microcode
[   18.119124] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[   18.119343] radeon 0000:01:00.0: WB enabled
[   18.119352] [drm] fence driver on ring 0 use gpu addr 0x40000c00 and cpu addr 0xffff880154e89c00
[   18.119361] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   18.119365] [drm] Driver supports precise vblank timestamp query.
[   18.119450] radeon 0000:01:00.0: irq 44 for MSI/MSI-X
[   18.119479] radeon 0000:01:00.0: radeon: using MSI.
[   18.119560] [drm] radeon: irq initialized.
[   18.136844] [drm] ring test on 0 succeeded in 1 usecs
[   18.137444] [drm] ib test on ring 0 succeeded in 0 usecs
[   18.137944] [drm] Radeon Display Connectors
[   18.140122] [drm] Internal thermal controller with fan control
[   18.141506] [drm] radeon: power management initialized
[   18.141597] No connectors reported connected with modes
[   18.141604] [drm] Cannot find any crtc or sizes - going 1024x768
[   18.143798] [drm] fb mappable at 0xA0142000
[   18.143802] [drm] vram apper at 0xA0000000
[   18.143814] [drm] size 3145728
[   18.143819] [drm] fb depth is 24
[   18.143823] [drm]    pitch is 4096
[   18.143976] fb1: radeondrmfb frame buffer device
[   18.143987] [drm] Initialized radeon 2.16.0 20080528 for 0000:01:00.0 on minor 1
[   20.181931] ata1: link is slow to respond, please be patient (ready=0)
[   24.408637] ata1: COMRESET failed (errno=-16)
[   24.408648] ata1: hard resetting link
[   24.976203] md: linear personality registered for level -1
[   24.979178] md: multipath personality registered for level -4
[   24.980603] md: raid0 personality registered for level 0
[   24.982434] md: raid1 personality registered for level 1
[   24.983820] async_tx: api initialized (async)
[   24.984491] xor: automatically using best checksumming function: generic_sse
[   24.988621]    generic_sse:  5296.000 MB/sec
[   24.988625] xor: using function: generic_sse (5296.000 MB/sec)
[   25.007604] raid6: int64x1   1265 MB/s
[   25.024603] raid6: int64x2   1261 MB/s
[   25.041561] raid6: int64x4   1152 MB/s
[   25.058533] raid6: int64x8    890 MB/s
[   25.075503] raid6: sse2x1    3195 MB/s
[   25.092463] raid6: sse2x2    3941 MB/s
[   25.109452] raid6: sse2x4    4488 MB/s
[   25.109456] raid6: using algorithm sse2x4 (4488 MB/s)
[   25.114682] md: raid6 personality registered for level 6
[   25.114689] md: raid5 personality registered for level 5
[   25.114694] md: raid4 personality registered for level 4
[   25.125319] md: raid10 personality registered for level 10
[   25.469702] UDF-fs: warning (device sda): udf_fill_super: No partition found (1)
[   25.881350] aufs test_add:294:mount[401]: uid/gid/perm /squashfs 0/0/0755, 0/0/01777
[   25.889347] aufs test_add:294:mount[409]: uid/gid/perm /boot 0/0/0755, 0/0/01777
[   29.344985] systemd-udevd[867]: starting version 200
[   29.756393] ACPI Warning: 0x0000000000006040-0x000000000000605f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
[   29.756405] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   29.843865] iTCO_vendor_support: vendor-support=0
[   29.847202] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[   29.847281] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[   29.847345] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   29.852725] systemd-udevd[896]: renamed network interface eth0 to eno1
[   29.857694] hp_accel: laptop model unknown, using default axes configuration
[   30.079308] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x15
[   30.082150] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x15
[   30.082815] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x15
[   30.083399] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x15
[   30.083920] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[   30.109279] cfg80211: Calling CRDA to update world regulatory domain
[   30.111987] Bluetooth: Core ver 2.16
[   30.112005] NET: Registered protocol family 31
[   30.112008] Bluetooth: HCI device and connection manager initialized
[   30.112011] Bluetooth: HCI socket layer initialized
[   30.112014] Bluetooth: L2CAP socket layer initialized
[   30.112019] Bluetooth: SCO socket layer initialized
[   30.132044] ata1: link is slow to respond, please be patient (ready=0)
[   30.160070] input: HP WMI hotkeys as /devices/virtual/input/input7
[   30.167017] usbcore: registered new interface driver btusb
[   30.217030] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
[   30.217033] Copyright(c) 2003-2012 Intel Corporation
[   30.217170] iwlwifi 0000:0d:00.0: pci_resource_len = 0x00002000
[   30.217172] iwlwifi 0000:0d:00.0: pci_resource_base = ffffc90011734000
[   30.217174] iwlwifi 0000:0d:00.0: HW Revision ID = 0x34
[   30.217310] iwlwifi 0000:0d:00.0: irq 45 for MSI/MSI-X
[   30.265256] iwlwifi 0000:0d:00.0: loaded firmware version 18.168.6.1
[   30.265594] iwlwifi 0000:0d:00.0: CONFIG_IWLWIFI_DEBUG enabled
[   30.265600] iwlwifi 0000:0d:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[   30.265605] iwlwifi 0000:0d:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[   30.265610] iwlwifi 0000:0d:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
[   30.265615] iwlwifi 0000:0d:00.0: CONFIG_IWLWIFI_P2P disabled
[   30.265623] iwlwifi 0000:0d:00.0: Detected Intel(R) Centrino(R) Wireless-N 1030 BGN, REV=0xB0
[   30.265912] iwlwifi 0000:0d:00.0: L1 Enabled; Disabling L0S
[   30.281967] iwlwifi 0000:0d:00.0: device EEPROM VER=0x716, CALIB=0x6
[   30.282010] iwlwifi 0000:0d:00.0: Device SKU: 0x150
[   30.282019] iwlwifi 0000:0d:00.0: Valid Tx ant: 0x1, Valid Rx ant: 0x3
[   30.282069] iwlwifi 0000:0d:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
[   30.282275] Registered led device: phy0-led
[   30.293185] lis3lv02d: 8 bits 3DC sensor found
[   30.638158] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   30.652540] systemd-udevd[883]: renamed network interface wlan0 to wlo1
[   30.716401] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input8
[   30.716951] Registered led device: hp::hddprotect
[   30.716999] hp_accel: driver loaded
[   33.849525] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   37.639499] ata1.00: failed to enable AA (error_mask=0x1)
[   37.639511] ata1.00: ATA-8: ST9500325AS, 0005, max UDMA/100
[   37.639518] ata1.00: 0 sectors, multi 16: LBA NCQ (depth 31/32)
[   37.640699] ata1.00: failed to enable AA (error_mask=0x1)
[   37.640715] ata1.00: configured for UDMA/100 (device error ignored)
[   37.640748] ata1: EH complete
[   37.641056] scsi 0:0:0:0: Direct-Access     ATA      ST9500325AS      0005 PQ: 0 ANSI: 5
[   37.641527] sd 0:0:0:0: Attached scsi generic sg1 type 0
[   37.641717] sd 0:0:0:0: [sdb] 0 512-byte logical blocks: (0 B/0 B)
[   37.641992] sd 0:0:0:0: [sdb] Write Protect is off
[   37.642003] sd 0:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   37.642092] sd 0:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   37.642748] sd 0:0:0:0: [sdb] Attached SCSI disk
[   52.484904] warning: process `hwsetup' used the deprecated sysctl system call with 1.23.
[   52.572077] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   54.807151] r8169 0000:07:00.0: eno1: link down
[   54.807490] ADDRCONF(NETDEV_UP): eno1: link is not ready
[   54.809763] iwlwifi 0000:0d:00.0: L1 Enabled; Disabling L0S
[   54.816608] iwlwifi 0000:0d:00.0: Radio type=0x2-0x2-0x1
[   54.901933] iwlwifi 0000:0d:00.0: L1 Enabled; Disabling L0S
[   54.908853] iwlwifi 0000:0d:00.0: Radio type=0x2-0x2-0x1
[   55.011847] ADDRCONF(NETDEV_UP): wlo1: link is not ready
[   59.114623] md: Autodetecting RAID arrays.
[   59.114628] md: Scanned 0 and added 0 devices.
[   59.114631] md: autorun ...
[   59.114633] md: ... autorun DONE.
[   78.610233] wlo1: authenticate with 08:86:3b:0a:35:16
[   78.621290] wlo1: send auth to 08:86:3b:0a:35:16 (try 1/3)
[   78.624149] wlo1: authenticated
[   78.624769] wlo1: associate with 08:86:3b:0a:35:16 (try 1/3)
[   78.628698] wlo1: RX AssocResp from 08:86:3b:0a:35:16 (capab=0x411 status=0 aid=3)
[   78.632714] wlo1: associated
[   78.633608] ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[   89.297915] wlo1: no IPv6 routers present
[  101.019290] NILFS version 2 loaded
[  376.920061] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[  376.921462] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[  376.925054] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[  376.969612] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[  376.971069] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[  376.971072] psmouse serio1: issuing reconnect request

Code: Select all

[email protected] /root % smartctl -a /dev/sdb                                               
smartctl 5.42 2011-10-20 r3458 [x86_64-linux-3.4.52-std371-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Momentus 5400.6
Device Model:     ST9500325AS
Serial Number:    6VEQXA4B
LU WWN Device Id: 5 000c50 036b8e640
Firmware Version: 0005
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Sat Aug 31 07:46:17 2013 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

Error SMART Values Read failed: scsi error aborted command
Smartctl: SMART Read Values failed.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: UNKNOWN!
SMART Status, Attributes and Thresholds cannot be read.

Read SMART Log Directory failed.

Error SMART Error Log Read failed: scsi error aborted command
Smartctl: SMART Error Log Read Failed
Error SMART Error Self-Test Log Read failed: scsi error aborted command
Smartctl: SMART Self Test Log Read Failed
Device does not support Selective Self Tests/Logging

Code: Select all

[email protected] /root % hdparm -i /dev/sdb  

/dev/sdb:

 Model=ST9500325AS, FwRev=0005, SerialNo=6VEQXA4B
 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
 RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
 BuffType=unknown, BuffSize=8192kB, MaxMultSect=16, MultSect=16
 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=0
 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
 PIO modes:  pio0 pio1 pio2 pio3 pio4 
 DMA modes:  mdma0 mdma1 *mdma2 
 UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 
 AdvancedPM=yes: unknown setting WriteCache=enabled
 Drive conforms to: unknown:  ATA/ATAPI-3,4,5,6,7

 * signifies the current active mode

Any help would be great. I just need to recover as much data as possible. It is a Seagate drive on my HP DV 6 6115. It passes SMART test on doing a hard disk test but I get error 305 on the other tests.


Thanks.

gernot
Posts: 1129
Joined: 07 Apr 2010, 16:19

Re: Need to detect hard drive to recover data; unable to do

Post by gernot » 31 Aug 2013, 07:34

The Interface between harddisk /dev/hdb and the PC dont work correct.

>>>>Error SMART Values Read failed: scsi error aborted command

Can you recheck with other hardware or set the interface speed jumper on the HD.

Gernot

Post Reply