eth0=IP1/XX and eth1=IP2/XX cause infinite dhcp attempts

Post in this forum for problems at boot time, if there was no problem for burning the disc. For example can't find the CD, or strange errors when you press enter at the very first prompt.
pva
Posts: 4
Joined: 19 Jun 2015, 14:09

eth0=IP1/XX and eth1=IP2/XX cause infinite dhcp attempts

Postby pva » 28 Jun 2015, 15:03

I've specified eth0 and eth1 boot options for systemrescuecd-4.5.3:

Code: Select all

        loopback loop /systemrescuecd-x86-4.5.3.iso
        linux (loop)/isolinux/rescue64 isoloop=systemrescuecd-x86-4.5.3.iso nonm eth0=172.16.11.11/24 eth1=X.Y.Z.32/24 gateway=X.Y.Z.1 dns=8.8.8.8 rootpass=password
        initrd (loop)/isolinux/initram.igz


Now at boot time instead of having expected IP addresses I received infinite cycle of the following messages:

Code: Select all

>>> Attempting to get DHCP address on eth1...
udhcpc (v1.18.2) started
Sending discover...
Sending discover...
Sending discover...
No lease, failing
busybox udhcpc -n -i eth1   --> 1
>>> Attempting to get DHCP address on eth0...
udhcpc (v1.18.2) started
Sending discover...
Sending discover...
Sending discover...
No lease, failing
busybox udhcpc -n -i eth0   --> 1


Could somebody suggests what's going on here? Is this a bug?

pva
Posts: 4
Joined: 19 Jun 2015, 14:09

Re: eth0=IP1/XX and eth1=IP2/XX cause infinite dhcp attempts

Postby pva » 28 Jun 2015, 15:19

I found workaround! If I specify nodhcp option, systemrescuecd will boot as expected with correct IP addresses assigned.


Return to “Boot problems”

Who is online

Users browsing this forum: No registered users and 2 guests